Trojan Horse Battle Station Kit Parts List: 3 Greek Soldiers, 3 Soldier Stands, 1 Top Shelf, 2 Buttresses, 4 Wheels, 4 Axle Spacers, 2 Axle Rods, 1 Bottom Shelf, and 1 Trojan Horse.
How to build the Trojan Horse Battle Station Kit
Step 1: Peel away all the protective tape that covers the wood. Be sure to peel away all the tape from both sides of each piece before you begin assembling the kit.
Step 2: Build the cart first. Place the Bottom Shelf so that the JEMTOY logo is flipped over and not seen. Glue the 4 Axle Spacers (little D-shaped things) into the 4 corner spots on the Bottom Shelf. Use a tissue or cotton swab to clean up glue blobs as you go.
Step 3: It’s a good idea to let the Axle Spacers dry. While you wait, glue the 3 Greek Soldiers foot peg into their little rectangular base so they can stand up and fight like an Ancient Greek.
Step 4: A small piece of sandpaper is included so you can easily taper the ends of the Axle Rods for a proper fit into the Wheel. The Wheels don’t need to be glued if they are a tight enough fit. Sand the outer edge of the Axle Rods until they fit tightly into the Wheels.
Step 5: When the Axle Spacers are dry you can move on to this step, but not until. Push one Wheel onto each Axle Rod. Slide each Axle Rod through 2 Axle Spacers and push on the last two Wheels. If you decide to glue your Wheels to the Axle Rods, be sure the Wheels can freely turn when you are done.
Now the cart is ready to roll!
Step 6: Now just a little bit of glue on these 2 spots.
Step 7: Set the Trojan Horse into the 4 peg holes that run down the center of the Top Shelf of the cart.
Step 8: Slip the two Buttresses into place, and glue them to the Bottom Shelf of the cart.
Step 9: A few drops of glue on the Buttresses so the Top Shelf will stay in place.
Step 10: You must insert the Top Shelf diagonally and maneuver it down to rest on the Buttresses.
Adjust the Top Shelf so it is centered and press it down.
The divination set comes with a 6″ x 7.5″ laser etched Oracle Board and three Was Scepters to cast across the board to conduct a reading. The board is shaped as a vessel that represents the heart and its contents. Let us weigh your heart, and see if the oracle can lighten its load with entertainment and enlightenment.
Set the Egyptian Oracle Board facing you. Hold the three Was Scepters in your two hands, shake them up, cup your hands over the top of the board, and release them so they all land on top.
There are three different Was Scepters included with the set:
The one representing the past is the wavy snake shaped scepter.
The straight one represents the present.
The one that fans out into a papyrus shape on top is the future.
The Egyptian Oracle Board is divided into stations. The Was Scepters have two ends. Once dropped, the scepters top and bottom ends will point to six stations on the board depending on how they land.
Start the reading from the station where the bottom end of the past scepter lands. Now read the station where the top end is. From there move on to the present (from bottom to top) and future in the same way. This gives you six points of reference within three time frames to pull your reading from.
All forms of divination take a bit of practice. Combine what the board reveals and your own gut feeling. Divination is a form of theatrical improvisation because divination must come from the gut and be spontaneous. It takes practice to open your intuition, believe what you feel, and dare to speak freely. Practicing divination will make you a better person.
Get good at dropping the Was Scepters and reading them to yourself before you move on to doing readings for others. You can practice on your cats. If you don’t have a cat, you can practice on a pretend cat. Or maybe get a dog. A dog would never jump on the board like a cat might. They’d jump on the board like a dog would. Dog wood? No. The board is made from maple ply, but I digress.
The Stations of the Egyptian Oracle Board
Right Eye of Horus (The Sun) – Your public persona. Role in society, role in family, role in business, social circles. Ambition, or lack of it. This is actually the eye you see on the left side of the board, but it is Horus’ right eye because he’s looking at you… got it? (I just remember sun is on my left, moon is on my right.)
Left Eye of Horus (The Moon) – Your secret side. Stuff inside you don’t let out. Is there something wicked waiting in the shadows or is that a glimmer of hope I see in the dark? Whether you like it or not this is probably the true you. What could be keeping it from getting out? And how can we get it to go back once it does get out? Art, writing, poetry, creativity… it’s all here. Lurking.
Rebirth – DEATH. Things end, but something always begins because of that ending. Remember the dead hippie dude sang: We’re all one and life flows on within you and without you. Be aware of new doors opening, especially as you lose what you once had. Life is big changes. Those who can reinvent themselves win. Thank you dead hippie dude.
Trade – In the balance of life we all must give and receive. What are you trading and what are you getting? Business, social relationships, the concept of trade pops up in lots of situations. Lack of balance, debts owed, supply and demand. Are you at balance with the universe?
Ankh – LIFE. There is one eternal life but many bodies. Our bodies all share in this one life. Welcome to the here and now. Pleasure, plenty, and the good life is what we all desire. You’ve got it or you want it. Go get it. Protect it. Keep what you have. Get more. Most of life is how we see it. Live now or forever rest in peace! What? – It don’t all make sense and it’s not always fair, but that’s life.
Family – Our chromosomes are programmed for us all to cower in our caves clinging to each other hoping we can all cope with whatever horrible terrors are presently outside waiting to eat us, or worse. We need each other. This is why family is important. Raising your own child can be an amazing life experience. On the flip side family pressure can be so powerful it is hard to live life your own way if you don’t agree with everything your family does. We were all born, so at one time we all had a family. We also collect our own family as we go. What family means to us can vary and be very complex. The desire to keep a family together, or to break away from one, can be intense. This is all that and more.
Education – Challenging your brain to learn something new can happen anywhere. A nearby lake side trail, local library, a talk with a wise elder, world travel, school, or YouTube tutorials are great places to learn something new. Education could be school or some other adventure where you learn a lesson. Hopefully it’s a good one. Some lessons hurt, so be careful.
Opportunity – An image of Horus riding a crocodile. There is usually some amount of risk involved with all of life’s opportunities. First you have to see the opportunity, and then you have to say or do something to bring the opportunity to your benefit. It’s risky. Sometimes these opportunities can go very wrong. I say it’s always better to get in trouble from trying your best, than to get in trouble from doing nothing as life passes you by. Keep your agenda pure of heart and go for it, but look out for the crocodiles. They don’t care about your agenda. They think you taste good and they’ll take any opportunity to find out. What sort of vulnerability does your new benefit bring?
Career – Some people like the idea of a life long career. Some wish they had one. Some hate what they have. A long and successful career can gain you respect, power, and standing. Or you could mess it all up and become a scum bag.
Ka – This is your SOUL. Spiritual matters, religion, after life, bucket list stuff, worshipful, thankful, (or fearful) of the divine. Sometimes we are driven to do something to appease our soul. Whatever that means… but you know it when you’re doing it, because it matters that much. You could also be searching for your self. Wondering who you are. Soul searching is serious stuff.
Struggle – Life is struggle. Keep fighting. This is not your time to give up, even if you might want to. You can do it. The board believes in you.
Truth – There are times in our lives when we come to moments of great awakening and awareness. Some small piece of the puzzle comes together and what was once a mystery now makes sense. Truth can be elusive. This can also mean the search for truth. The need to know. Something missing. The passing, withholding, transferring, or destroying of the truth is the power of writing history. How does your story go? What is your truth? Does it fill you with joy or pain?
Here is an example reading:
Your past #1 begins steeped in Education, which has set you up for some strong #2 opportunities gaining you public respect and perhaps even a power position. Your #3 career has become your very #4 life, and by working hard for a fair wage you have turned your #5 opportunities into a good life, full of the good things #6. However, you find at times that your career is taking over your life, blocking your happy future from being complete. Perhaps there is something left undone, maybe more to life than work, work, work?
How I came to this reading:
So I started where the wavy past scepter #1 bottom end rests at EDUCATION and the #2 top rests in between OPPORTUNITY AND THE SUN (Horus’ right eye).
I move on to #3 the present scepter which starts at CAREER and #4 ends at ANKH (Life).
The future #5 rests at OPPORTUNITY and #6 ends with a happy ending at TRUTH.
I do notice that the present scepter is on top “blocking” that happy ending, so there is room for an even happier ending if you focus and unblock what your life needs to get there.
How this all came to be ~
A LONG TIME AGO in an era we call the 80’s, during my undergrad at Maryland Institute I studied under the truly amazing Egyptologist, world traveler, actor, author, and artist, Bob Lienhardt. In one of the many classes I took with Bob, I did a project that involved some research into the Temple of Thoth as the origin of Tarot cards.
The ancient Egyptian Temple of Thoth was popular because one could get a direct answer from the oracle. They would enter a circular room with many painted symbols on the walls. The priest would drop yarrow stalks and then divine the answer from however the stalks landed and pointed at the symbols painted on the walls.
Traveling gypsies passing through Egypt replicated the temple symbols onto decks of cards for easy transport. Reading fortunes became a way for them to earn money while traveling, and the tradition of Tarot cards spread across Europe.
Because the Egyptian oracle is powerful magic, I wanted to create an experience closer to the ancient Egyptian divination method, but I needed to compress the experience into something smaller than a gigantic Egyptian Temple. For my class I had made a hand painted divination board that has since eroded like all great ancient relics eventually do. Here in my new and improved laser etched wood design I have merged the wisdom of the past to the needs of the present to bring you a divination board inspired by the Egyptian Temple of Thoth. It is hard to believe I began work on this project over 30 years ago. It is my hope that the Oracle Board both entertains and enlightens you.
The Egyptian Oracle Divination Board is available at my Etsy Shop, where ever that is. Look around, it’s gotta be here somewhere. Maybe we should consult the board. Oh there it is, it’s up on top of the page. Where it says, Etsy Shop. Thanks so much for checking out my art work.
Monsters have never been so small! The JEMTOY Tiny Kaiju Battle Play Set fits in your hand. Very small parts intended for collectors age 15 and older. Four different sets to choose from – amazing gift, available now in my etsy shop.
Platforms are small, about 2″ x 2″ and they fit together like a puzzle, so if you collect them all, you can mix and match your pieces for the ultimate Tiny Kaiju Battle!
It’s been a while since I’ve made a horrible Gomper, so they’re back with a mighty vengeance. Laser cut plywood kaiju monster. He stands 4.5″ tall, and the wings are 6.5″ wide. I really enjoyed making this fine fella. The build gave me a few new ideas, and that’s what a prototype is for. Thank you horrible Gomper.
There are some on my facebook who seem annoyed at times with our president. Being a toy maker, I thought of a simple solution for them. Turn the crank, it hammers his head. Make your own laser cut Make America Great Again toy with the FREE JEMTOY SVG file.
My wife is a big fan of Space Invaders. Our love for science fiction, fantasy movies, and video games has made my geeky life a very happy place. Here is a nerd’s dream come true. A large 2″ wide Mother Ship with an Alien logo laser etched on front. Made from proof grade maple plywood, cut and etched in HD on a Glowforge laser cutter. Item ships fast via USPS Priority Mail. Wear this over a black tee shirt, and you’re ready for any cosplay or comic convention.
Atari Space Invaders is a pop icon that stands for the entire gaming community. Be counted among the invaded. You can get one for the geek on your holiday list at my etsy shop below. Thanks, and have a great holiday!
I have always been fascinated by how simple homopolar motors are. Kids are blown away by the immediate fun. But not just kids, everyone wants to check it out. Made only of a battery, a magnet, and copper wire, this simple motor can get really hot. It’s hard to play with them without forgetting and grabbing the hot wire or battery by mistake. I wondered if I could build little light weight wood structures to make them more finger safe. Getting the perfect wire shape can also be tricky, so I have to consider balance and stability, and of course see how fast I could get it to spin.
I’m really psyched about what I have cooked up in the JEMTOY studio, because these things can really spin. The design is laser cut from 1/4″ maple plywood, and is easy enough for anyone to put together. Here is a video of me assembling the JEMTOY Homopolar Motor Kit so you can see how crazy cool it is. I mean, for science, that is.
The homopolar motor kit contains everything you need except some glue and the AA batteries, which this toy will eat up in a one-hour sitting. You sorta just play with it until your battery gets hot and dies. It’s fun. To build the kit you will need some super glue or white glue to connect the wood pieces together, and a wire stripper/snipper or hobby knife to strip 1/2″ of plastic insulation off the ends of the two little wires. Be careful if you use a hobby knife, okay? Those things can be unpredictable. You might need a little screwdriver to tighten the bolt, but finger tight should work if you don’t have one. Really, this is a very easy kit to build. Check out the video, and get ’em while they’re hot at: https://www.etsy.com/shop/JEMTOY
EACH JEMTOY HOMOPOLAR MOTOR KIT CONTAINS:
7 Laser Cut Wood Pieces
1 Brass Nut and Bolt
1 Neodymium Rare Earth Magnet
2 Five Inch Insulated Wires
YOU SUPPLY GLUE AND AA BATTERIES!!!
OH NO! MORE SCIENCE! The nut and bolt in this kit are made of brass, not steel like most nuts and bolts. Steel is ferrous, which means it contains iron. Iron is magnetic, and a steel bolt would snap tight to the magnet, and then, the homopolar motor would not spin. The brass bolt is nonferrous, so it does not stick in place to the magnetized battery top. So much to think about for such a simple device, right?
TIPS AND TRICKS FOR FASTEST SPINNING KUNG-FU ACTION
Let battery and magnet cool before touching it.
Flip the magnet – sometimes it spins faster the other way!
Use a fresh AA battery – remember it gets HOTTER the longer it spins!!!
Glue the wood pieces together – white glue or super glue will work.
Adjust wires on bottom to touch magnet loosely – not too tight.
Don’t forget it spinning too long – battery gets hot!
Parental guidance suggested for the wee ones – battery gets HOT I tell you.
Kids like that it’s slightly dangerous because kids like to be challenged. Every second you play with this homopolar motor kit, you will be learning, thinking, wondering, and expanding your understanding of the universe. For reals. It’s that cool. Great rainy day project to keep them busy for hours, or an amazing way to share the wonders of magnets and electricity with your students. Just keep them informed about how hot the battery gets, and let them have at it. Perfect project for science fairs, S.T.E.A.M. projects, maker faire booth. Kids have fun learning engineering, design, and the basics of how an electric motor works.
Google and Wikipedia have all the scientific explanations if you want to search the term homopolar motor. No matter how many times I read that stuff, I have to admit, it just looks like magic to me, so that’s another thing I love about it. I think the darn thing is magic!